Application

Special Value Pricing
for Your Business,
Home, Garage,
Basement or Patio
Floor Projects:

$144.95 For our 1/2 Kit.
1.5 Gallons – Coverage
250 sq. ft. (Equal to a
1.25 car garage) Select
w/or without tools &
sundries…

$239.95 For Full Kit. 3
Gallons – Coverage 500
sq. ft. (Equal to a
standard 2.5 car garage.)
Select w/or without tools
& sundries…

 Quality Epoxy
Technology! EpoxyTech®
is manufacturered with a
molecular bonding
priming agent + coating in
one! This is the only
cycloaliphatic epoxy on
the market that can make
this statement!
This is not a substandard
water or solvent based
epoxy that will have to be
replaced every 1 to 2
years. EpoxyTech
comes with a lifetime
guarantee!

MADE IN THE USA

As Seen on & Used By:
Millions of Square Feet Sold... Trusted by Floor Coating Professionals Everywhere!

Rated Highest Gloss Levels on the Market!

Step 1

Remove all debris from floor. Leaf blowers and shop vacuums work well to ensure removal of dust and contaminates.

Step 2

Scrub floor to remove any contaminates using EpoxyTech® “Etch & Clean” solution (Odorless, 0%VOC’s). For heavily soiled floors (oil & contaminates) we recommend “Oil Stop” Primer (available). Check these spots by dropping a drip of water onto effected area and make sure to see that the water dissipates into concrete. This will ensure a mechanical bond. This product is a molecular bonding primer agent + coating in one! Primer not required on oil & contaminant free floor.

Step 3

Allow foaming period to occur for approximately 15 minutes and rinse thoroughly.

Step 4

Mix (wand included) EpoxyTech® part A and part B together. Mix thoroughly for 3-4 minutes.

Step 5

Cut in edges with supplied chip brush.

Step 6

Squeegee (included) EpoxyTech® evenly distributing over 10′ x 10′ area and roll perpendicular to the area covered.

Step 7

Apply flake and aluminum oxide (both optional) by throwing into air. Cover 3-5′ sections at a time.

(*Note: Options UV Polyurea Clear/Top Coat Available – Not Necessary on all floors. Recommended for all floors exposed to high amounts of sunlight and over non-slip applications or to add depth to the look of floor.)